NAFLOR Waterborne Adhesive for Linoleum flooring NQ600

   本品采用高品质进口丙烯酸脂合成树脂及优质填充剂等原料,应用先进技术和配方精制而成, 是一种性能优异的水溶性塑料地板胶,无毒无害,为绿色环保产品。

   This product is produced by advanced technologh and formulation and using imported acrylatepolymers and high quanlity pigment and filler.  It is non-toxic and not harmful,  belongs to green environment-friendly product. 


• 使用前应搅拌均匀,建议用B1锯齿刮刀均匀地涂刮,铺展后凉胶时间0-20分钟(根据气候温度不同,可用手指触摸判断表干情况)即可铺设上述地板材料。

• 铺下地板后,用木板滚筒滚压以排除引入的空气,确保胶水全部粘结附到地板背面。

• 24小时后可固化,48小时后可步行。

Application Instruction:

• Stir thoroughly the product before use,apply it evenly on the surface of substrate by using B1 toothed trowel. After short open time of 0-20 min,the substrate is ready to accept above flooring material. 

• After the flooring material is applied on the substrate rub the surface by wood plate and roller by 50kg roller to remove entranced air under the flooring mate-rial.Make sure that adhesive has transferred to the back of the flooring material. 

• The adhesive will be dried after 24h, and set to foot traffic after 48h.


理论涂布量 Theoretical application rate

B1齿刮板 350-400g/m² 

B1 toothed trowel 350-400g/m² 


Quality Grarantee Period:12 months if stored in 1-40℃。




    The product should be protected against frost and direct light during transportation,storage and application.Application temperature should not be lower than 5℃